Unisight TZHEF04 Series User Manual page 62

Digital Video Network Surveillance System
"Active Frame" to PTZ icon and press [ENTER] key, you can enter PTZ menu as
follows: Shown as Fig.5.31 below
PTZ menu description
Select camera: Select one PTZ camera.
RS-485 parameters: Including baud rate, data bit, stop bit, parity, flow control,
etc. These parameters must be the same as those PTZ protocols.
PTZ address: Each PTZ has one different address.
PTZ type: DVR had the following PTZ protocols: YouLi, LinLin-1016, LinLin-
820, Pelco-p, DM DynaColor, HD600, JC-4116, Pelco-d WX, Pelco-D, VCOM VC-
2000, NetStreamer, SAE/YAAN, Samsung, Kalatel-312, CELOTEX, TLPelco-p,
TLHHX-2000, BBV, RM110, KC3360S, ACES, ALSON, INV3609HD, Howell, Tc
Pelco P, Tc Pelco D, AUTO-M, AUTO-H, ANTEN, CHANGLIN, DeltaDome, XYM-
12, ADR8060, EVI-D30, DEMO-SPEED, DM-PELCO-D, ST832, LC-D2104,
HUNTER, A01, TECHYIN, WEIHAN, LG, D-MAX, Panasonic, KTD-348, infinova,
PIH-7625, LCU, DennarDome, etc. Other PTZ protocols will be added with the new
firmware.
Note: In DVR "PTZ" menu, if you select Pelco-P protocol, when you setup
PTZ address, please plus or minus one compared with Camera ID. For example,
if camera ID is 2, the DVR PTZ address is set as ID 3.
Preset setup: Preset is using one number to represent the camera's position,
zoom, focus and iris. Move "Active Frame" to "Setup" button on the right side of
"Preset" item, press[ENTER]key to enter preset setup menu. You can save 128 preset
Fig. 5.31 PTZ parameters setup
Unisight Digital Technologies, Inc
62