Digital Video Network Surveillance System
When you finish setup, in "Alarms" menu, press "Confirm" button to save all
parameters.
Note: If any schedule is modified, you must reboot DVR to make it become
effective.
Exceptions
The exceptions can be handled at present include: hard disk full, hard disk error,
illegal access, IP address conflict, network failure, and NTSC/PAL differ.
Enter "Exceptions" menu: Shown as Fig.5.27 below
Including the following handle methods:
Audible Warning: Beeping.
Upload to Center: Send exception information to center host PC.
Trigger Alarm Output: trigger local relay output.
You can select more than one handle methods.
After you finish setup, press "Confirm" button to save parameters. Press "Cancel"
button or [ESC] key to abort.
Fig. 5.27 Exceptions setup
Unisight Digital Technologies, Inc
58