User Name And Password - Unisight TZHEF04 Series User Manual

Digital Video Network Surveillance System
button to switch numeric button between "numeric" mode and "function" mode.
Step1: Connect Video out 2 with monitor by a cable.
Step2: Press [3] to enter the spot out mode.
Step3: Press [shift] to enter the numeric mode
Step4: Press [1] to [4] button to switch video spot output from channel 1 to
channel 4
Note: make sure that there is video signal input; otherwise spot out will be only shown as blue
screen.
4.4

User name and Password

Note: When DVR is delivered from factory, there is only one default
administrator named "admin", and password is "12345". The administrator's
name can not be modified, while the password can be modified. The
administrator can create 15 users and define their rights.
Login
Login dialog as shown Fig.4.3 below
Use [ ]/ [ ] keys to select one user, press [ ] key to enter "Password" edit
box, input corresponding password, press [ENTER] key to exit edit box. The "Active
Frame" will move to "Confirm" button. You can press [ENTER] key to enter main
menu. If there is no response, it means the user name and password are not matched.
After three error times, DVR will enter the preview mode.
Fig. 4.3 Login dialog
Unisight Digital Technologies, Inc
19