Table of Contents
Advertisement
Digital Video Network Surveillance System
External alarm input setup:
Step 1: Select one alarm input Use [↑] [↓] keys to select one alarm input.
Step 2: Alarm type
This is sensor type. You can select "Normal Open" or "Normal Close" according
to the sensor type.
Step 3: Enter "Alarm in Handling" sub menu
In the "Alarms" menu, there are two options for "Alarm Handling" item. One is
"Ignore", and the other is "Handle". If you select "Handle" option, you can active
"Policy" and "PTZ Linkage" buttons on right side. Move "Active Frame" to "Policy"
button and press [ENTER] key, you will enter "Alarm in Handling" sub menu: Shown
as Fig.5.24 below
5.23 Alarms setup
Unisight Digital Technologies, Inc
54
Advertisement
Table of Contents
