NCR 7454 User Manual page 134

4-26 Chapter 4: Operating System Recovery
10. The directory that Ghost is now looking in should be Z: (if not,
switch to Z). Select the
(nnnnnnn.gho) and press
11. Select the
Local destination drive
12. Set the sizes of the primary and secondary partitions as follows.
O/S Primary Partition/ Format
DOS 2 GB/FAT16
Win95 2 GB/FAT16
WinNT 2 GB/FAT16
Win98 Single FAT 32 partition
Win2000 Single FAT 32 partition
WinXPe Single NTFS partition
Note: In order to do this you may need to clear the amount from
the second partition.
13. Press .
Enter
14. If you are recovering from Win9x, it is likely that the second
partition will be too small for FAT32. If so, a dialog is displayed
Converting partition from FAT32 to FAT, proceed?
Choose .
Yes
15. At the next dialog box,
Proceed with disk load? Destination drive will be
permanently overwritten,
Choose to start the recovery process.
Yes
File name to load image from
.
Enter
and press
Secondary Partition Size
2 GB/FAT16
Fill remainder as FAT 32
Fill remainder as NTFS
N/A
N/A
N/A
file
.
Enter