NCR 7454 User Manual page 111

3. Apply power to the terminal so the CD-ROM drive can be opened.
4. Insert the CD that contains the operating system image.
7454
Model
Win2000
*22xx D370-0489-0100 Not Supported D370-0433-0100 D370-0444-0100 D370-0442-0100 D370-0445-0100
32xx D370-0516-0100 D370-0565-0100 D370-0501-0100 D370-0500-0100 D370-0503-0100
34xx, D370-0516-0100 D370-0565-0100 D370-0501-0100 D370-0500-0100 **Discontinued D370-0445-0100
35xx,
36xx,
37xx
Note: * The 22xx models have been discontinued. Contact NCR
Product Manager for LPIN availability.
** Contact Product Manager for Controlled Delivery support of
Windows 95 LPIN for 32xx model.
5. Boot the terminal.
6. Press
7. Press
8. In the
9. Verify that the
10. Go back to the
11. Set the
12. Set all other
13. Exit Setup and Save Changes.
WinXPe WinNT
at the screen prompt to enter Setup.
F2
to set BIOS System defaults.
F9
menu, select
Advanced
LPT 1 Mode
Advanced
Parallel CD-ROM Boot
options to
Boot
As the terminal reboots, you should see a message during boot
indicating that the CD-ROM has been recognized:
Micro Solutions BACKPACK CD-ROM v0.3
. . .
Booting from BACKPACK CD
Starting MS-DOS
Chapter 4: Operating System Recovery
Software CD LPINs
Win98
I/O Device Configuration
is set to
ECP.
menu, select
to
Enabled
Disabled.
Win95
D370-0445-0100
**Controlled
.
Multiple ROM Menu
.
4-3
DOS
.