NCR 7454 User Manual page 119

Chapter 4: Operating System Recovery 4-11
Furthermore, the following settings/revisions have been configured:
Preinstalled W2K to include the Product ID Number (PID)
Placed the Gold Drive Part Number, Date Created, LPIN, and
Release in Registry under:
HKey-Local_Machine\Software\NCR\Gold Drive
Ran Sysprep, using sysprep.inf and sysprep.bat, so that the mini
installation will run on initial boot with the following parameters:
- Automatically include PID
Established a FAT32 primary system partition that fills the entire
drive
Included necessary OS cab files in C:\Install
Installed SP2
Exposed to both EM and EM+ video chipsets
Exposed to a mouse so MicroTouch will install properly
Installed SMI Control Panel (4.3.5)
Installed Intel Proset utility
Set virtual memory to 192-394
Enabled APM
Set 'APM monitor shutoff' to 'Never'
'Enable PME' (in Intel Proset utility) set to 'Hardware Default'
Disabled game port
Enabled DMA
Set color to 16 bit
Added SetResolution.exe to RunOnce registry.
Added TerminalCheck.exe to Run registry.
Added NCR-specific EULA.
Added '/noguiboot' parameter to boot.ini to hide splash at startup.