NCR 7454 User Manual page 124

4-16 Chapter 4: Operating System Recovery
Furthermore, the following settings/revisions have been configured:
Preinstalled NT to include the Product ID Number (PID)
Placed the Gold Drive Part Number, Date Created, LPIN, and
Release in Registry under:
HKey-Local_Machine\Software\NCR\Gold Drive
Ran Sysprep (so that the mini installation will run on initial boot)
with the following parameters:
- Automatically include PID
Host.cmd set in RunOnce to update the registry
Established a 2gb FAT16 primary system partition
Established a secondary NTFS partition that fills the remainder of
the drive
Included necessary OS cab files in C:\Install
Made SP6a folder available in C:\Install (installed)
Exposed to both EM and EM+ video chipsets
Installed SMI Control Panel (4.3.5)
Installed Intel Proset utility
'Enable PME' (in Intel Proset utility) set to 'Hardware Default'
Enabled DMA
Muted Volume Line-In
Added SetResolution.exe to RunOnce registry.
Added TerminalCheck.exe to Run registry.
Added NCR-specific EULA.
Added '/noguiboot' parameter to boot.ini to hide splash at startup.