Beyonwiz DP-Lite User Manual page 70

1) Step 1: Select Content Type
Use the UP/DOWN buttons to select the type of storage device you
wish to access, as follows:
HDD: This is the internal hard disk drive.

folders, as follows;
recording: Stores your recorded TV and Radio programs.

contents: Stores other media files you have transferred onto the

internal HDD from external sources.
You can create additional folders on the internal HDD to organise your
media files (see "Add Folders" section in Chapter 7).
Network: This will show the following networked devices;

PCs connected to your home network.

Networked storage devices e.g. NAS.

WizPNP servers.

NOTE
Ensure that the PC you wish to access has at least one shared

folder set up to allow access and to share contents.
For WizPNP servers to be visible, you must enable the WizPNP

Client function (see "WizPNP" section in Chapter 4).
It contains two pre-set
To scan and update the list of PCs connected to your home network,
press the RED button.
You can also scan for a specific network device. Press the GREEN
button, enter the IP address of the device and select "OK".
File Playback
63