Quick Setup
3) How to Change Configuration
In the setup menu, there are several ways to change configuration.
Here are three examples of configuration changes frequently used.
Selection in a pop-up menu: If you press the OK button, a pop-up
menu will be displayed.
Use the UP/DOWN buttons to select an
option and press the OK button to apply this setting. If you decide
not to change settings, press the EXIT button to close the pop-up
menu.
20
Setup using the NUMERIC buttons: The NUMERIC buttons are used
to set configuration with numbers such as time information. You can
also move the cursor to the left or right by using the LEFT/RIGHT
buttons while you are editing the configuration. Press the OK button
to apply the change, or cancel it with the EXIT button.
NOTE
You can also use the CH +/- buttons to increase or decrease the
value instead of typing with the NUMERIC buttons.