Beyonwiz DP-Lite User Manual page 68

3) Set timer
To set a timer for a future program, perform the appropriate procedure
as follows;
For EPG Action = "Change Svc", place the cursor on your desired

program and use the following functions;
To set a recording timer: Press the REC button. The program will

now be shaded red.
To set a viewing timer: Press the PLAY button. The program will

now be shaded blue.
To delete an existing timer: Press the STOP button. The program

will now return to the normal grey shading.
For EPG Action = "Set Timer", place the cursor on your desired

program. Press OK to set a recording timer. The program will now
be shaded red. A second press of the OK button will set a viewing
timer, and the program will now be shaded blue. A third press of the
OK button will delete the timer and return the program to the normal
grey shading.
NOTE
When EPG Action = "Set Timer", the REC, PLAY and STOP buttons

can still be used to set and delete timers.
Timers set via the EPG are created with a recurrence setting of "Once".

You must edit the timer if you wish to change the recurrence e.g. for a
weekly timer.
4) Edit timer
To edit an existing timer, place your cursor on your desired timer and
perform the appropriate procedure as follows;
To edit a recording timer, press the REC button.

To edit a view timer, press the PLAY button.

This will open the "Edit Timer" window.
desired changes to the timer (see "Edit Timer" section earlier in this
chapter).
NOTE
You can create and edit a timer quickly by pressing the REC button

twice for a recording timer or the PLAY button twice for a view timer.
If a program is only partially covered by a timer, it is shaded in pink

for a recording timer or pale blue for a view timer.
STB & PVR Function
You can now make your
61