A/V Output Setting - Beyonwiz DP-Lite User Manual

2-2. A/V Output Setting

You need to set the video and audio configurations to suit your TV and
audio equipment. Make sure the video and audio connections on the
DP-Lite are correctly connected to your TV and audio equipment (see
the "A/V Connection" section in Chapter 3).
The A/V Output menu consists of two parts; video output and audio
output.
1) Video Outputs
Video Type: Select either PAL or NTSC format. PAL is the standard

format in Australia.
Video Output: Select the connection type used to connect your DP-

Lite to your TV set in the "Video Connection" section in Chapter 3.
Resolution: If you select HDMI or Component for video output, set the

resolution to suit the resolution of your TV screen.
TV Aspect Ratio: select either 4:3 or 16:9 to suit the aspect ratio of

your TV screen.
NOTE
Component video output supports SD (576i for PAL and 480i for

NTSC), 480p, 576p, and HD 720p and 1080i.
If you set the video output resolution to HD (i.e. more than 576p),

the composite and S-Video outputs will be disabled automatically.
If you set the video output resolution higher than the maximum

resolution that your TV set can accept, your TV will not display a
picture (refer to your TV's user manual).
If you set the HDMI output as Auto, the DP-Lite configures the best

format of HDMI suitable for your TV set automatically. Some TV sets
do not support the auto-configuration function.
must set the resolution manually.
HDMI outputs audio in digital format as well.

Quick Setup
In this case, you
23