Operating Tv Set - Beyonwiz DP-Lite User Manual

Introduction

4-2. Operating TV set

The enclosed remote control can also be used to control a TV set
provided by major TV manufacturers. In order to operate a TV with the
enclosed remote control, please select TV mode by pressing the TV
button. The red backlight beneath the TV button lights when you press
a button in this mode.
There are two ways to program the remote control to work with your TV,
automatic code search or manual set.
1) Automatic Code Search
Turn on your TV then press and hold the TV button until the red-
backlight turns on. Point the remote control at your TV and then click
the UP button. After the red-backlight of the TV button blinks, wait at
least 3 seconds to check if your TV turns off or not. If your TV turns off
automatically, the remote control is ready to use with your TV. If your
TV does not turns off, repeat clicking the UP button until your TV turns
off. Once your TV turns off when you click the UP button, press the
OK button. The TV button blinks three times to indicate that the
remote control is set.
8
2) Manual Set
You can set your remote control with 3-digit code manually. Check the
following table and find the brand of your TV.
Turn on your TV then press and hold the TV button until the red-
backlight turns on. Point the remote control at your TV and enter the
3-digit code with the NUMERIC buttons. Wait until the red-backlight
blanks three times. If your TV turns off automatically, your remote
control is ready to use with your TV.
press the TV button and enter another code from the table under that
brand.
FUJITSU 208
261
410
HITACHI 206
229
240
287
301
309
317
382
406
If your TV does not turns off,
223 224 218 253
286 307 325 329
422 423
207 208 215 218
231 232 236 238
244 253 256 286
292 298 299 300
304 305 306 307
3123 314 315 316
325 358 367 381
383 384 399 405
407 410 411