Quick Setup; Start Quick Setup; Quick Setup Of Video Output Format - Beyonwiz DP-Lite User Manual

Quick Setup

4. Quick Setup
This chapter guides you through the basic set up of your DP-Lite so that
you can utilise its basic features.
features of the DP-Lite, refer to Chapter 9 "Advanced Setup".

1. Start Quick Setup

If A/V and antenna connections are complete, press the STANDBY
button to start.

1-1. Quick Setup of Video Output Format

If you can already see a picture on your TV screen, you can skip this
section and go on to the next section "Basic Operation". If nothing is
displayed on the TV screen, firstly check that your TV is set to the
correct video input channel as selected in the "Video Connection"
section in Chapter 3 (refer to your TV's user manual for instructions on
how to do this). Secondly, you need to adjust the format and
resolution of the video output to suit your TV. Since you are currently
unable to access this setting through the set-up menu, a TV-OUT
button is provided on the remote control unit (RCU).
18
In order to utilize the advanced
The default video output is SD PAL (576i). Press the TV-OUT button
successively to switch the video output to SD NTSC (480i), HD PAL
(720p), HD NTSC (720p), HDMI PAL (1080i), HDMI NTSC (1080i), PAL
HDMI Auto, NTSC HDMI Auto, HDMI PAL (576p) and HDMI NTSC (480p)
formats. Select the video output to suit your chosen video connection
type, as follows;
Composite: SD PAL or SD NTSC

S-VIDEO: SD PAL or SD NTSC

Component: HD PAL or HD NTSC

HDMI: PAL HDMI Auto, NTSC HDMI Auto, HDMI PAL or HDMI NTSC

NOTE
Allow 3 seconds after pressing the TV-OUT button for the

configuration change to become effective.
Once you have a picture displaying on your TV screen, it is

recommended that you verify your video format configuration in the
Setup menu (see "A/V Output Setting" section later in this chapter).