Beyonwiz DP-Lite User Manual page 62

2) Change Recording Options while Recording
You can change some of the recording options even after the recording
has started. Press the POP-UP button and use the DOWN button to
select "Recording Information", and then press OK.
The "Recording Information" window will now be displayed, containing
one or two current recordings. Use the UP/DOWN buttons to select
the recording you wish to change.
You can now change the following recording options;
Duration: To change the duration, press the LEFT or RIGHT button.

File Name: To change the file name press the RED button.

File Lock: To change the lock status of the recording file, press the

GREEN button.
See "Instant Recording" or "Add New Timer" sections earlier in this
chapter for a detailed explanation of these recording options.
NOTE
You can stop the recording instantly by pressing the STOP button.

You can view the service being recorded by pressing the OK button.

The clock mark indicates the recording is due to a timer.

Extending the duration of a timer so that it overlaps two existing

timers at the same time point will cause a timer conflict (see "Timer
Conflict" section next in this chapter).
STB & PVR Function
55