Lidic (Line-In Digital Converter - Available Separately) - Beyonwiz DP-Lite User Manual

2-4. LiDiC (Line-in Digital Converter – available separately)
The LiDiC can receive either Composite or S-VIDEO signals from one or
two external A/V devices simultaneously, and pass these signals
through to the DP-Lite. You need to configure the LiDiC to suit the
connected external A/V device(s) as follows;
LiDiC: You can enable or disable the LiDiC.

enabled, new services named "950 LiDiC 1" and "951 LiDiC 2" will
appear in the service list. You can watch and enable the PVR
functions for external A/V signals by selecting the 950 or 951 service.
Display: Select either of the following options;

Full: Displays incoming video signal as 16:9 aspect ratio.

Centre: Displays incoming video signal as 4:3 aspect ratio.

Input 1: Select either Composite or S-VIDEO to suit the connection of

the external A/V device connected to Input 1 of the LiDiC.
Video Type 1: Select either PAL or NTSC to suit the video output of

the external A/V device connected to Input 1 of the LiDiC.
Input 2: Select either Composite or S-VIDEO to suit the connection of

the external A/V device connected to Input 2 of the LiDiC.
Video Type 2: Select either PAL or NTSC to suit the video output of

the external A/V device connected to Input 2 of the LiDiC.
NOTE
Refer to the LiDiC user manual for more information about connecting

external A/V devices to the DP-Lite.
Quick Setup
When the LiDiC is
27