Infinite Peripherals PP-60 User Manual page 21

Memory Switch Details
The default factory memory switch setting is shown below:

Enable/Disable buzzer.
SW1:

Execute Carriage Return as Line Feed command.
SW2:

Disable/Ignores Line Feed commands.
SW3:

Disables Line Feed command after Carriage Return command.
SW4:

Set small font as default character size.
SW5:

Reserved.
SW6:

Reserved.
SW7:

Prevents others from discovering printer when set to ENABLE. Must
SW8:
be set after pairing is completed.

Allow the use of USB port for communications.
SW9:

SW10: (OFF) set USB as the host mode.
Infinite Peripherals, Inc.
www.ipcprint.com
PP-60 User Manual v1.0
Figure 15
. . . . . . . . . . . . . . . . . . . .
Page 21