Prepare The Receiver Collar - Petsafe Wireless Pet Containment System Receiver Collar Operating Manual

Prepare the Receiver Collar

Your Receiver Collar comes with short Contact Points.
Long Contact Points for pets with long or thick hair
are available through our Customer Care Center at
1-800-732-2677. Tighten the Contact Points using the
Test Light Tool (A) one-half turn beyond fi nger tight.
Check the tightness weekly.
To Insert and Remove the Receiver Collar Battery
Note: Do not install the battery while the Receiver Collar is on
your pet.
This Receiver Collar utilizes a replaceable PetSafe
(RFA-67). This unique battery is designed to make battery
replacement easier and increase water protection.
To insert the battery, align the symbols on the battery
(arrow) and Receiver Collar (triangle) (B). Use the edge of
the Test Light Tool (B) to turn the battery clockwise until the
arrow lines up with the lock symbol on the housing.
To remove the battery, turn the battery counter-clockwise
using the edge of the Test Light Tool (C). DO NOT
attempt to cut into or pry open the battery. Be sure to
discard the used battery properly.
battery
®
www.petsafe.net
A
B
C
3