Battery Contact Verification; Function And Response Table - Petsafe Wireless Pet Containment System Receiver Collar Operating Manual

Battery Contact Verification

Remove Receiver Collar from your pet. Press the button and verify that the LED light
illuminates. If the LED light does not come on remove the battery. Locate the metal tabs in
the battery well. Gently lift the tabs to ensure that the battery will make good contact. Replace
the battery into the Receiver Collar. Press the button and check that the LED light illuminates.

Function and Response Table

Indicator Light
Response
1 Flash
2 Flashes
3 Flashes
4 Flashes
5 Flashes
6 Flashes
Flashes once every
4 to 5 seconds
Static Correction
Level
1
2
3
4
5
6
www.petsafe.net
Receiver Collar
Function
No Static Correction,
Beep Only
Low Static Correction
Medium-Low Static
Correction
Medium Static
Correction
Medium-High Static
Correction
High Static Correction
Indicates Low Battery
Temperament
of Pet
Initial Training
Mode
Timid
Timid or Average
Average Energy
Average or High
Energy
High Energy
5