Test Light Instructions - Petsafe Wireless Pet Containment System Receiver Collar Operating Manual

My next-door
neighbor has
an In-Ground
Containment
System and the
Receiver Collar
does not activate
near their property.

Test Light Instructions

• Your neighbor's In-Ground Fence signal may interfere with
the operation of the Receiver Collar preventing activation
close to their fence. To minimize the interference, reduce
the size of the Pet Area or move the Transmitter away from
the In-Ground Fence System.
• Adjust the Pet Area so that the Receiver Collar activates for
at least 5 feet beyond the reduced Boundary setting when
walking towards the In-Ground Fence.
1. Set the Correction Level to 2 or above.
2. Hold the Test Light Contacts to the Contact Points.
3. Walk toward the Boundary Zone holding the Receiver
collar at your pet's neck level until the Test Light fl ashes.
Save Test Light for future testing.
Note: If the Test Light does not fl ash, install a new battery and
re-test. If Test Light still does not fl ash, contact the Customer Care
Center at 1-800-732-2677.
www.petsafe.net 13