Petsafe PIF00-12917 Operating And Training Manual
Stay + play wireless fence
Hide thumbs
Also See for PIF00-12917:
- Operating and training manual (28 pages) ,
- Mounting instructions (3 pages)
Related Manuals for Petsafe PIF00-12917
Summary of Contents for Petsafe PIF00-12917
- Page 1 Model Number PIF00-12917 stay + play wireless fence ™ operating and training guide Please read thIs eNtIre guIde beFore begINNINg...
- Page 2 Therefore, if you have reason to believe that your pet may pose a danger to others or harm himself if he is not kept from crossing the boundaries, you should NOT rely solely upon the PetSafe Stay + Play Wireless ®...
- Page 3 • Do not place anything on the top of the Transmitter or cover any ventilation holes. This may overheat the Transmitter and cause early transmit failure. • Do not place Transmitter in a closet or any other confined, unventilated area. www.petsafe.net...
-
Page 4: Table Of Contents
To get the most protection out of your warranty, please register your product within 30 days at www.petsafe.net. By registering and keeping your receipt, you will enjoy the product’s full warranty and should you ever need to call the Customer Care Center, we will be able to help you faster. -
Page 5: Components
• Scissors • Lighter • Drill & mounting hardware • Tape measure • Non-metallic collar and leash Set up and training help: www.petsafe.net/fence Want professional installation help? Invisible Fence Brand installers will come to your home ® and install your new PetSafe System for an additional cost. Contact your local dealer at ®... -
Page 6: How The System Works
How the System Works The PetSafe Stay + Play Wireless Fence has been proven safe, comfortable, and effective ® ™ for pets over 5 pounds. The system works by transmitting a radio signal up to 105 feet in all directions. You temporarily define the Pet Area with Boundary Flags for a visual aid in training your pet. -
Page 7: Operating Guide
The Transmission Failure Alarm makes a continuous tone indicating a Transmitter problem. In this situation, your pet can no longer be contained. Contact the Customer Care Center for a replacement at 1-800-732-2677. www.petsafe.net... -
Page 8: Charge The Receiver Collar
Charge the Receiver Collar Step The Receiver Collar Charger is designed to plug into a standard AC wall outlet. The Receiver Collar light will glow red when the Receiver Charger is properly seated into the Receiver Charge Jack. The light will turn green when charging is complete. A built in safety circuit prevents the Receiver Collar from overcharging. - Page 9 (3 flashes per second) Fast pulsating red Tone for duration of Static Correction being (3 flashes per second) Static Correction delivered up to 15 seconds Continuous green Over Correction Protection; No tone (10 seconds) collar locked for 10 seconds www.petsafe.net...
- Page 10 To Set the Static Correction Level Read all steps before attempting to set the Static Correction Level. 1. Press the Mode Button and release (3B) when the Receiver Indicator Light illuminates Red (3C). 2. The Receiver Indicator Light will emit a series of Red flashes representing the Static Correction Level.
-
Page 11: Adjust The Pet Area To Desired Size
Light flashes. If the Receiver Collar beeps before or after the desired Boundary Zone, return to the Transmitter and adjust the Boundary Control Dial. Repeat this process until the Receiver Collar is beeping at the desired location. Record your settings on the next page for future reference. www.petsafe.net... -
Page 12: Transmitter Range Chart
Transmitter Record Your Range Chart Settings Boundary Boundary Boundary Final Final Receiver Control Switch Switch Boundary Boundary Static Dial HIGH Switch Control Correction Position Setting Dial Level (1-6) 17 ft. 35 ft. (HIGH or Position LOW) (1-8) 19 ft. 41 ft. Home 22 ft. -
Page 13: Fit The Receiver Collar
4. Center the Contact Points underneath your pet’s neck, touching the skin. You may need to trim the hair in the area of the Contact Points. Never shave the dog’s neck; this may lead to a rash or infection. www.petsafe.net... - Page 14 5. Check the tightness of the Receiver Collar by inserting one finger between the end of a Contact Point and your pet’s neck. The fit should be snug but not constricting (6B). 6. Allow your pet to wear the collar for several minutes then recheck the fit.
-
Page 15: Training Guide
Training Guide Be Patient With Your Pet Important: Proper training of your pet is essential to the success of the PetSafe ® Stay + Play Wireless Fence . Read this section completely before beginning to ™ train your pet. Remember that the PetSafe... -
Page 16: Day 1 - Boundary Awareness
Day 1 - Boundary Awareness Phase Tone Only Training Mode Perform three sessions on day 1, each training session lasting 10-15 minutes. Goal: To have your pet learn that the Boundary Flags and warning beep from the Receiver Collar define the new Pet Area. Setup: • Program the Static Correction Level on the Receiver Collar to Level 1 Tone Only training mode. -
Page 17: Days 2 Thru 4 - Continue Boundary Awareness
-Have a family member cross from inside the Pet Area to outside of it. -Throw a ball or treat outside of the Pet Area. -Have a neighbor walk their pet outside of the Pet Area. • Gradually increase distraction level. Never coax or call your pet out of the Pet Area. www.petsafe.net... -
Page 18: Days 9 Thru 14 - Unleashed Supervision
Steps: 1. With full control of your pet on a leash, have the distraction presented. 2. If your pet does not move toward the distraction, praise and offer a treat. 3. If your pet does react to the distraction, allow him to go into the Boundary Zone. 4. -
Page 19: Days 15 Thru 30 - Pet Monitoring
You may initially need to convince your pet to leave the Pet Area with a food treat and lots of praise. Note: You may also carry your pet out of the Pet Area. Congratulations! You have now successfully completed the training program. www.petsafe.net... -
Page 20: Wireless-To-Go
To purchase additional accessories for your PetSafe Stay + Play Wireless Fence , contact the ® ™ Customer Care Center at 1-800-732-2677 or visit our website at www.petsafe.net to locate a retailer near you. Component Part Number Extra Stay + Play Wireless Fence... -
Page 21: Frequently Asked Questions
Wireless Pet Fence Receiver Collar for each ™ pet. Contact the Customer Care Center at 1-800-732-2677 or visit our website at www.petsafe.net to locate a retailer near you. Will the Stay + Play Wireless • N o. The Stay + Play Wireless Fence is only effective on ™... - Page 22 Can I place the Receiver on • Y es. You may use any 3/4 inch, non-metallic collar. another collar? Do I need to perform • Check your pet’s neck daily for irritation from the maintenance on my Contact Points. Stay + Play Wireless Fence • Check the Contact Points on the Receiver Collar weekly to ™...
-
Page 23: Troubleshooting
. The field may be affected by ™ surrounding “electronic noise,” which can cause it to fluctuate up to 5%. • W here the Receiver Collar activates is influenced by the speed and orientation of the Receiver Collar as your pet enters the Boundary Zone. www.petsafe.net... - Page 24 The Receiver Collar activates • The Receiver Collar activates when it loses the Transmitter in the middle of the yard. signal. This sometimes occurs if a large metal object is between the Receiver Collar and Transmitter, if the orientation of the Receiver Collar changes near the Boundary Zone, or if the surrounding “electronic noise”...
- Page 25 Receiver Collar battery to leak onto your pet’s neck. Please review and follow the important safety information on page 2, and the instructions in Step 6 under the heading “Fit the Receiver Collar” on pages 13 and 14. www.petsafe.net...
-
Page 26: Terms Of Use And Limitation Of Liability
Terms of Use and Limitation of Liability 1. Terms of Use This Product is offered to you conditioned upon your acceptance without modification of the terms, conditions and notices contained herein. Usage of this Product implies acceptance of all such terms, conditions, and notices. 2. -
Page 27: Compliance
Monday - Friday 10:30 AM - 7 PM This product has the benefit of a limited manufacturer’s warranty. Details of the warranty applicable to this product and its terms can be found at www.petsafe.net and/or are available by sending a stamped addressed envelope to PetSafe Ltd. -
Page 28: Mounting Template
Radio Systems Corporation ® 10427 Electric Avenue Knoxville, TN 37932 1-800-732-2677 www.petsafe.net Protected by US Patents 6,879,300 and 7,142,167. Other patents pending. 400-1243/1 ©2010 Radio Systems Corporation...