Operation; Check Current Brand Code - Radio Shack 15-309 User Manual

n
Notes:
• During a search, you can press SET to change search direction from forward to
backward or vice versa.
• If no keys are pressed in 10 seconds, search stops.

Operation

Check Current Brand Code

For future reference and to save time if you ever need to set up your remote again,
retrieve and write down your device codes for each device key on your universal remote.
Complete the following steps to check the code number for a specific device. The red
LED on your universal remote will flash to indicate the codes.
1. Press the device key on your universal remote.
2. To check the first digit, press and hold SET, then press numerical key 1. The red
LED will flash repeatedly to indicate the first digit. (once for 1, twice for 2, etc. If the
red LED does not flash, this indicates that the first digit is "0.")
9