Channel Scan - Radio Shack 4-IN-1 REMOTE CONTROL Owner's Manual

15-1991.fm Page 10 Wednesday, October 20, 1999 10:37 AM
Now, the device you chose will control volume
whenever you press a volume key.

CHANNEL SCAN

You can use your remote control to scan
through the channels of your TV, VCR, or cable
box.
1. Press the device key for the device with
the channels you want to scan (
). The red light blinks.
CBL
2. Point your 4-in-One Remote at the device
you want to scan and press
The remote control repeatedly scans
through the device's available channels,
stopping on each channel for about 3 sec-
onds.
3. When you see a channel you want to
watch, press any key other than
Scanning stops.
10
, , or
TV VCR
.
SCAN
.
SCAN