Installation - Tripp Lite B130-101S-WP Owner's Manual

Installation

1
Connect the Male end of the VGA splitter cable to the HD15 port on the
source computer.
2 Connect one of the Female ends of the VGA splitter cable to the Local
Unit's HD15 port using a VGA cable.
3 (Optional) Connect a local monitor to the remaining Female connector
of the VGA splitter cable using a VGA cable.
4 Connect the included 3.5 mm Male to DB9 Female adapter cable to the
3.5 mm Female port on the local unit.
5
Connect the DB9 port on the computer to the DB9 port on the adapter
cable.
6 Connect the external power supply to the power jack on the local unit
and plug it into an appropriate power source.
7 Connect the 110 Punchdown Connector on the local unit to the 110
Punchdown Connector on the remote unit using Cat5/5e/6 cable.
8 Connect the HD15 port on the remote unit to a monitor.
9 Connect the included 3.5 mm Male to DB9 Male adapter cable to the
3.5 mm Female port on the remote unit.
10 Connect the DB9 Male port on the adapter cable to the DB9 port of the
serial device you are connecting (touch-screen monitor, barcode
scanner, etc).
11 Connect the external power supply to the power jack on the remote unit
and plug it into an appropriate power source.
12 Turn the display(s) on first.
13 Turn on the computer.
200908073 93-2931.indb 5
5
4
1
2
3
6
5
9
7
10
8
11
9/21/2009 4:56:05 PM