Connections & Controls; Qt528 - Q-See QT504 User Manual

CONNECTIONS & CONTROLS
You may view this DVR using a standard 19" (or larger) VGA monitor or a television. The
former is connected using the VGA port on the back panel while the television utilizes the
BNC "Video Out" port on the back. Your DVR is configured to use the VGA port, so to use a
TV, you will need to press and hold the STOP/ESC button (part of item 8 in the diagram)
for approximately 10 seconds until you hear a beep indicating that the video mode has been
switched.
This DVR can be controlled through the USB mouse, the remote control or by using the
buttons on the front panel of the device. We have found that the majority of our customers
prefer to operate their DVRs using the USB mouse because of its ease of use and flexibility
and our manual is set up with this in mind.

2.1 QT528

FRONT PANEL
ITEM NAME FUNCTION
1 Receives signals from remote control
IR RECEIVER
2 NUMBER BUTTONS Select individual channels for full screen view
3 DIRECTION Selects multi-screen viewing mode
Navigates through selections in menus
4 ENTER Confirm Selection
5 INDICATOR LIGHTS Shows status of the DVR Functions and the Hard
Drive
6 MENU Opens the Main Menu
Increases the value in Setup mode
7 USB PORT Used for external USB backup devices. The mouse
will not function in this port.
8 PLAYBACK CONTROLS In addition to normal DVR playback and record
operation, the following have additional functions:
RECORD Controls Focus in PTZ mode
REVERSE Controls Speed in PTZ mode
STOP/ESC Exits current interface or status
9 SEARCH/ZOOM Enter Search mode
Controls Zoom function in PTZ mode
10 INFO Displays system information
11 BACKUP Enter Backup mode
Decreases the value in Setup mode
12 Mutes or unmutes audio
AUDIO
13 PTZ Enter PTZ mode
10
CHAPTER 2
1 2 3 4 5 6
8 9 10 11 12 13
BACK PANEL
2 3 4
1
11 12 13
ITEM NAME
1 PTZ
2 K/B
7
3 ALARM IN
4
NET
5 VGA PORT
6
VIDEO OUT
7 VIDEO IN
8 AUDIO IN
9 AUDIO OUT
10 POWER
11 +5V and GND
12 ALARM OUT
13 USB PORT
14 SPOT OUT
15 DC IN
16 FAN
5 6 7
14
FUNCTION
Connections for Pan-Tilt-Zoom speed dome cameras.
Y = "+" Z = "-"
Connector for a PTZ keyboard
Connections for up to 8 external sensors
Network (ethernet) port
VGA output for 19" or larger monitor
BNC connector for telvision or monitor
BNC connectors for up to 8 cameras
4 channels of audio input
Audio output for amplified speaker
Power On/Off
+5V and grounding
1 Channel relay output for external alarm
For the USB mouse
Connect to another monitor as an auxiliary output
channel. This monitor will only display video and will
have no menu access.
Power input for 12V DC power supply
Cooling fan exhaust port. This should not be blocked.
8 9 10
15 16
11