Qt504 - Q-See QT504 User Manual

2.3 QT504

FRONT PANEL
1 2 3 4
ITEM NAME FUNCTION
RECORD
1 Begins manual recording
Controls Focus in PTZ mode
2 PLAY Begins playback
3 REWIND Rewinds video
Controls camera speed in PTZ mode
4 FAST FORWARD Advances playback speed
5 MENU/+ Opens the Main Menu
Increases the value in Setup mode
BACKUP/-
6 Opens Backup Menu
Decreases the value in Setup mode
7 STOP/ESC Ends video playback.
Exits current interface or status
8 INDICATOR LIGHTS Shows status of the DVR Functions and the Hard
Drive
9 IR RECEIVER Receives signals from remote control
10 DIRECTION Selects multi-screen viewing mode
Navigates through selections in menus
11 RETURN Confirms selection
12 USB PORT Used for external USB backup devices. The mouse
will not function in this port.
14
5 6 7 8 9
10 11 12
BACK PANEL
1 2 3
6 7 8
ITEM NAME FUNCTION
1 BNC connector for telvision or monitor
VIDEO OUT
2 SPOT OUT Connect to another monitor as an auxiliary output
channel. This monitor will only display video and will
have no menu access.
3 AUDIO OUT Audio output for amplified speaker
4 VIDEO IN BNC connectors for up to 4 cameras
5 DC IN Power input for 12V DC power supply
6 VGA PORT VGA output for 19" or larger monitor
7 Network (ethernet) port
NET
8 USB PORT For the USB mouse
9 PTZ Connections for Pan-Tilt-Zoom speed dome cameras.
Y = "+" Z = "-"
10 K/B Connector for a PTZ keyboard
11 +5V and grounding
+5V and GND
12 ALARM IN/OUT 4 Channel input and output for external sensors and
alarms
13 AUDIO IN 4 channels of audio input
4
9 10 11 12 13
5
15