Connections And Controls; Dvr Functions And Connections - Q-See H.264 NETWORK DVR User Manual

CONNECTIONS AND CONTROLS

You may view this DVR using a standard 19" (or larger) VGA monitor or a television. The
former is connected using the VGA port on the back panel while the television utilizes the
BNC "Video Out" port on the back. Your DVR is configured to use the VGA port as the main
display. To use a TV, you will need to press and hold the STOP/ESC, EXIT or VGA/TV button
(depending on model) for approximately 10 seconds until you hear a beep indicating that the
video mode has been switched. A display connected to the other port will not show the menu.

2.1 DVR FUNCTIONS AND CONNECTIONS

QT2124
FRONT PANEL
QT2124
ITEM NAME FUNCTION
1 IR RECEIVER Receives signals from remote control
2 NUMBER BUTTONS Select individual channels for full screen view
3 DIRECTION Selects multi-screen viewing mode
Navigates through selections in menus
4 ENTER Confirm Selection
5 Shows status of the DVR Functions and the Hard
INDICATOR LIGHTS
Drive
6 MENU Opens the Main Menu
Increases the value in Setup mode
7 Used for external USB backup devices.
USB PORT
8 PLAYBACK CONTROLS In addition to normal DVR playback and record
operation, the following have additional functions:
9 SEARCH/ZOOM Enter Search mode
Controls Zoom function in PTZ mode
10 INFO Displays system information
11 BACKUP Enter Backup mode
Decreases the value in Setup mode
12 AUDIO Mutes or unmutes audio
13 PTZ Enter PTZ mode
10
CHAPTER 2
1 2 3 4 5
REC HDD Backup Net Play
Search Info Backup Audio/+ P.T.Z/-
8 9 10 11 12 13
RECORD Controls Focus in PTZ mode
REVERSE Controls Speed in PTZ mode
STOP/ESC Exits current interface or status
Also switches video output mode.
BACK PANEL
1
VGA
VIDEO OUT
SPOT
NET USB
7 8
ITEM NAME
1 VGA PORT
2 VIDEO OUT
3 VIDEO IN
6 7
4 PTZ
Power
Menu 5 AUDIO IN
6 FAN
7 NET
8 USB PORT
9 K/B
10
SPOT OUT
11 ALARM OUT
12 ALARM IN
13
DC IN
2 3
1 3 5 7 9 11 13 15 17 19
2 4 6 8 10 12 14 16 18 20
VIDEO IN
9
FUNCTION
VGA output for 19" or larger monitor
BNC connector for TV or monitor
BNC connectors for up to 24 cameras
Connections for Pan-Tilt-Zoom speed dome cameras.
Y = "+" Z = "-"
4 channels of audio input
Cooling fan exhaust port. This should not be blocked.
Network (ethernet) port
For the USB mouse
Connector for a PTZ keyboard
Connect to another monitor as an auxiliary output
channel. This monitor will only display video and will
have no menu access.
1 Channel relay output for external alarm
Connections for up to 16 external sensors
Power input for 12V DC power supply
4 5 6
AUDIO IN 1 2 3 4
21 23
ALARM IN
P/Z K/B AUDIO OUT
Y Z A B 1 3 5 7 9 11 13 15
22 24
DC 12V
2 4 6 8 10 12 14 16
ALARM OUT
10 11
12 13
11