Connections And Controls; Front Panel; Rear Panel - Q-See QC444 User Manual

CONNECTIONS AND CONTROLS

2.1 FRONT PANEL

1
PICTURE 2-1
Number Item
Single Channel Viewing Mode: Opens Color Adjustment
Function
1
Button
Virtual Keyboard: Backspace function
2 IR Sensor Infrared Receiver for Remote Control
3 Escape Button Exit any menu or current operation
Viewing Mode: Go To Menu
4 Enter Button
In Menu: Acts as mouse click
Navigate through menus.
Directional
5 Change selections in pull down menus (Up/Down buttons)
Buttons
Toggle settings (Up/Down buttons)
6 Power Button Puts DVR into Standby mode or wakes it up.
Alarm: Not functional on this model
Net: Red light indicates that network connection is lost
7 Status Lights
HDD: Red light indicates that hard drive is operating
Power: Red light indicates that DVR is powered up
For use with flash drive when backing up or updating
8 USB Port
firmware. Not for use with mouse.
10
CHAPTER 2
2 3 4 5 6
7 8
Function

2.2 REAR PANEL

1 2
PICTURE 2-2
Number Item
1 Video In Ports BNC Connectors for video feed from cameras (4)
2 Audio In BNC Connectors for audio feed from microphones (2)
3 Audio Out BNC Connector for audio output
4 USB Port USB port for mouse
Turns DVR on or off. Use Shutdown menu function or front
5 Power Switch
panel power button before switching off.
6 Video Out BNC Connector to television
7 Network Ethernet cable connection to network
8 VGA Video Out To connect to a VGA monitor (19" or larger)
9 Power Input Connect 12V DC power supply here
3 4 5
6 7 8 9
Function
11