Connections And Controls; Qt454 - Q-See QT454-403-5 User Manual

CONNECTIONS AND CONTROLS

QT454

FRONT PANEL
1 2
ITEM NAME FUNCTION
1 POWER Power On/Off
2 NUMBER Select individual channels and enter data where required
BUTTONS
3 DIRECTION Navigates through selections in menus
Selects viewing mode - Full Screen or 4-Channel Multi-Screen
View
4 ENTER Confirm Selection
5 MENU Opens the Main Menu
Increases the value in Setup mode
6 PLAYBACK In addition to normal DVR playback and record operation, the
CONTROLS following have additional functions:
RECORD Controls Focus in PTZ mode
REVERSE Controls Speed in PTZ mode
STOP/ESC Exits current interface or status
7 SEARCH/ Enter Search mode
ZOOM
Controls Zoom function in PTZ mode
8 INDICATOR Shows power status of the DVR
LIGHT
9 INFRARED Receives signals from the remote control
WINDOW
10 BACKUP Enter Backup mode
Decreases the value in Setup mode
11 USB PORT Used for external USB backup devices. The mouse will not
function in this port.
10
CHAPTER 2
3 4 2 5 6 7 8
10 11
Also switches video output mode.
REAR PANEL
9 1
ITEM NAME
1 AUDIO IN
2 VIDEO IN
3 AUDIO OUT
4 SPOT OUT
5 VIDEO OUT
6 PTZ
7 K/B
8 ALARM OUT
9 ALARM IN
10 LAN
11
USB PORT
12 VGA PORT
13 DC IN
2 3 4 5 6 7 8 9 10
FUNCTION
4 Channels of audio input
Video input from up to 4 cameras
Audio output for amplified speaker
Connect to another monitor as an auxiliary output channel. This
monitor will only display video and will have no menu access.
BNC connector for TV or monitor
Connections for Pan-Tilt-Zoom speed dome cameras. Y = "+" Z
= "-"
Connector for a PTZ keyboard
1 Channel relay output for external alarms
4 Channel input for external sensors and alarms
Network (ethernet) port
For the USB mouse
VGA output for 19" or larger monitor
Power input for 12V DC power supply
11
12 13
11