Application Controls - Q-See QS SERIES Setup Manual

Recording Video
You are able to record live video locally to your device by tapping on the Record button.
These videos can be accessed and played back using the Playback function described later.
Tapping the Record button a second time ends the recording.
Snapshot
Tapping this button captures a still image from the selected camera. You are then given the
choice to save it or not. Images captured on the iPad and iPhone are saved to the device's
Photos folder, while those captured on an Android device are available through the Playback
function.
Close Channel
This button turns off the feed from the selected channel but does not disconnect your device
from the DVR. The square icon is then replaced by a triangular "play" icon which will restore
the channel's view to your device.
Volume Control
If you have an audio-enabled camera or a microphone connected to your DVR, you can turn
the audio on or off by tapping this button.

APPLICATION CONTROLS

The lower row of controls at the bottom of the QS View window are used switch modes with
the program as well as change the settings of the program itself.
Live View is the normal operating mode.
PICTURE 5-10
46
Device
You can switch between DVRs using either the Select button at the top of the screen or
the Device button at the bottom left. This latter button will display the number of available
systems next to its icon.
However, you can only add DVRs and edit
their profile with QS View from within the
Device List.
As was described at the beginning of this
chapter, to add a device, touch the + or
Add button (Apple or Android devices,
respectively) and then enter the information
needed to log in.
Touching the Edit button within the Device
List will add red icons to the left of the DVRs
within your list. You can tap on the DVR's
name to edit its information - such as to
change the password.
When you have made your changes, tap the
Done (Apple) or Save (Android) to save them.
You must have more than one device in the
list to delete a system from your list. Tapping
on the red icon to the left of the device that
you want to remove will bring up a red Delete
button allowing you to remove the DVR from
your list.
PICTURE 5-11
PICTURE 5-12
47