Table of Contents
Advertisement
Transmitter part number: 113-03
Call your dealer or visit
www.caralarm.com to order re-
placement transmitters.
Transmitter battery
replacement:
Remove the small screw from the
lower back case, and separate the
transmitter halves. Replace the 2
CR2016 batteries and reassemble
the transmitter case.
REMOTE START: Press and release the "START" button
twice. (see installer feature #1 for other options)
•
If the engine stalls, the system will make up to 3 more attempts.
•
Each time you park your vehicle, set the climate controls to give you
the desired interior temperature when you use the remote start.
•
The engine will run for the preset run time (see user feature #1).
•
Run Time Extender
remote start mode to restart the engine run timer.
NOTE: This can only be used once per remote start cycle. If you de-
cide not to drive your vehicle, you can turn off the remote start using the
same method to turn it on (keep in mind that the first press is considered
the Run Time Extender).
•
Upon entering the vehicle during remote start mode, turn the ignition
key to the "On/RUn" position (NOT START!!). when you press the
brake pedal, the remote start will turn off.
•
ThE PARkIng LIghTS wILL FLASh AnD
ThE STATUS LIghTS wILL FLASh RAPIDLy.
•
ThE IgnITIOn wILL TURn On AnD ThE
SySTEM wILL START ThE EngInE.
•
whEn ThE EngInE IS RUnnIng, ThE
STATUS LIghTS wILL FLASh SLOw AnD ThE
PARkIng LIghTS wILL STAy On AS LOng AS
REMOTE START MODE IS ACTIVE.
: Press the "START" button one time while in
The Transmitter
"start"/"unlock"
Transmitter Functions
button
3
Hide quick links:
Advertisement
Table of Contents
