Chapter 1 Parts Names And Functions - Denso GT10B-SM User Manual

Chapter 1 Parts Names and Functions

Reading window
Point this at the bar code
to read.
Trigger switch
Press this to read a bar code.
The following trigger switch operating
modes are available:
• Auto-off mode 1
• Auto-off mode 2
• Momentary switching mode 1
• Momentary switching mode 2
• Continuous reading mode
(The factory default is momentary
switching mode 1.)
In addition, the auto sensing mode is
also available for automatic trigger
operation.
Refer to Chapter 5 for details.
Interface cable
There are two types of
interface cables available.
• RS-232C interface
• PS/2 keyboard interface
Indicator LED
This turns blue after a successful read and red if
there is an error.
(Refer to Chapter 9 for details.)
Magic key
This key functions as an auxiliary key for
reads, data transfers, and the like. These
auxiliary functions include:
• Illumination LED switching function
• Data retransfer function
• Specific character transfer function
• Ready/standby switching function
• Auto sensing mode switching function
• Continuous reading mode switching
function
(The factory configuration assigns none
of these functions to this key.)
Refer to Chapter 6 for details.
1