Table of Contents
Advertisement
Chapter 1 Names and Functions
Built-in antenna
Performs wireless
communication according to
the Bluetooth
not modify this antenna
section or cover it by hand.
Indicator LED
Illuminates in blue when the scanner has scanned a code
successfully. If any error occurs, this LED flashes in red.
Refer to Section 8.2 for details.
Indicates the Bluetooth
Refer to Section 3.5 for details.
Indicates the remaining battery level.
Refer to Section 2.2 for details.
Trigger switch
Press this switch to start scanning. Also, establishes a
Bluetooth
broken with the scanner turned on.
The reading modes are available to match the needs of the
intended application.
Strap hole
Use this hole for attaching
the optional strap.
standard. Do
Reading window
Bring this window
to a code to be scanned.
wireless link status.
wireless link when the Bluetooth
Refer to Section 5.1 for details.
Magic key
When this key is pressed while the scanner
is turned off, the scanner is turned on and
the Bluetooth
Holding this key down while the Bluetooth
wireless link is established breaks the link.
Pressing this key quickly while the scanner
is turned on allows the operator to check
the remaining battery level.
Beep hole
The beeper sounds when the scanner has
scanned a code successfully.
Battery cover
Remove this cover to
replace the batteries.
1
wireless link is
wireless link is started.
Advertisement
Table of Contents
