Chapter 1 Packing List And Names And Functions - Denso GT10Q-SR Operator's Manual

Chapter 1 Packing List and Names and Functions

Packing list
This package contains the following items:
- Scanner unit
- Operator's guide (this book)
Names and functions
Reading window
Bring this window to a
code to be scanned.
Trigger switch
Press this switch to start code
reading.
Pressing this halfway emits a
laser light.
Pressing this fully scans a code.
The following modes are
available*:
• Auto-off mode
• Momentary switching mode
• Alternate switching mode
• Continuous reading mode 1
• Continuous reading mode 2
• Auto sensing mode
(The auto-off mode is the factory
default.)
*For more information...
For more information about the trigger switch function, magic key function, and indicator
LED, visit our Web site at:
http://www.denso-wave.com/
Interface cable
• RS-232C interface
1
Indicator LED
Illuminates in blue when the scanner
has read a code successfully. If any
error occurs, this LED flashes in red.
Magic key
Acts as an auxiliary key.
Any of these functions may be
assigned to the magic key*.
• Data retransfer function
• Ready/standby switching
function
• Readable code switching
function
• Marker mode switching
function
• Specific character transfer
function
• Auto sensing mode
switching function
• Barcode reader mode
switching function
(None of these functions is
assigned by default.)
Vibrator
The vibrator is integrated here. There is a
choice of two vibrator operations: "OK
vibrations" and "NG vibrations."
The "OK vibrations" is the factory default.
Vibrator
The vibrator is integrated here. There is a
choice of two vibrator operations: "OK
vibrations" and "NG vibrations."
The "OK vibrations" is the factory default.