Data Verification Mode; Notification Of A Scanning Failure Under Software Control - Denso GT10B-SM User Manual

(7) Data verification mode

Items
Scanning modes
Data verification type
Verification retry after mismatch
in 2-point verification
Verification result output in data
verification mode
(Report of match/mismatch status)
Verification start position in data
verification mode
Number of characters to verify, starting
from the verification start position
Scan lock in data verification mode

(8) Notification of a scanning failure under software control

Items
Notification of a scanning failure that
occurred under software control
Parameters
Regular read mode
Data verification mode
2-point verification
n-point verification
Disable
Enable
Disable transmission/
Disable transmission
Enable bar code data transmission/
Disable transmission
Enable bar code data transmission/
Enable NG transmission
Enable OK transmission/
Enable NG transmission
1st character
2nd character
3rd character
4th character
5th character
6th character
7th character
1 character
2 characters
3 characters
4 characters
5 characters
6 characters
7 characters
No specification
Enable
Disable
Parameters
Enable CAN (18h) transmission
Enable "ERROR" transmission
Disable transmission
: Can be changed only with the configuration software.
50
Defaults Refer to:
√
√
√
√
√
Section 7.1
√
√
Defaults Refer to:
√
Section 5.2