Arm Rests - Invacare Rea Spirea4 NG User Manual

1.
Tool: 5 mm Allen key
2.
Tool: 5 mm Allen key

ARM RESTS

A
B
Adjusting the arm rest height
1. Detachable arm rests
If your wheelchair is equipped with arm rests that
can be raised or lowered, you easily adjust the
height by pulling up the arm rest and loosening the
screw (A) under the arm rest. Move the screw up
or down to the desired position and retighten the
screw. Lower the arm rest again.
Be careful not to trap your fingers between
the side support plate and the frame when you
adjust the height.
2. Adjust the height of the arm rests by turning the
knob or loosening the screw (B), setting the desi-
red height and then re-tightening the knob or the
screw.
Be careful not to trap your fingers between the
arm rest pad and the side support plate when
you adjust the arm rest height.
19