3.
E
Tool: 5 mm Allen key
4.
Tool: 5 mm Allen key
1.
B
A
Tool: 5 mm Allen key
2.
C
D
Tool: 5 mm Allen key
28
3. Adjust the sides by loosening the screw (E). Adjust
and tighten the screw again.
4. To change the angle of the wings, loosen the screw
(D). Adjust and tighten.
D
NECK REST
1. Use the hand knob (A) to adjust the height of and
remove the neck rest. The tube is equipped with
a "memory ring". Loosen the screw (B), adjust,
and tighten.
2. Adjust the angle and depth with two screws (C)
and the handle (D). Loosen and adjust.