Invacare Rea Spirea4 NG User Manual page 14

ANGLE-ADJUSTABLE LEG RESTS
1.
A
2.
B
C
14
SETTINGS
Tool: 5 mm Allen key
FIXED LEG RESTS
C
A
Angle-adjustable leg rests support the legs and reduce
pressure. The leg rests can be used for bandaged legs
but not for legs in plaster casts. The leg rests must
always be fitted with calf pads, foot rests and heel
straps.
It is important to adjust the height and angle to get
the best seating position possible.
1. Adjusting the leg rest height
Adjust the leg rest's height by loosening screw
(A) with an Allen key. Adjust the leg support to
a suitable height and the screw catches in one of
the recesses on the leg rest tube. Then retighten
the screw.
2. Leg rest angle
Pull lever (B) with one hand while supporting the
leg rest with your other hand. When a suitable
angle is obtained, let go of the lever and the leg
rest will lock into one of seven preset positions
(C).
Do not put any heavy objects or let children
sit on the leg rest. It can damage the
mechanism.
The distance between the lowest part of the
foot plate and the ground must be at least 40
mm.
Adjusting the foot rest height
Adjust the foot rest's height by loosening screw (A)
with an Allen key. As you adjust you will hear "clicks".
One "click" is equivalent to one height level. Adjust
the foot support to a suitable height and the screw
catches in one of the recesses on the leg rest tube.
Then retighten the screw.
NB! Do not touch the upper screw (C).
The distance between the lowest part of the
foot plate and the ground must be at least 40
mm.