Invacare Rea Spirea4 NG User Manual page 34

HOW TO DISASSEMBLE YOUR WHEELCHAIR AHEAD OF TRANSPORT AS LUGGAGE.
1.
2a.
2b.
3.
4.
34
When you want to transport the Rea Spirea
you can easily remove certain parts to make the chair
smaller and lighter.
1. Start by removing the arm rests.
Press in the button on the spring to loosen the arm
rest and then lift it straight up.
2a. Release the foot rests by moving the lever (B)
forward or towards the sides while angling the
B
rests outwards. You can then easily lift off the
foot rests.
2b. Loosen the leg rests by pressing in the lever (C)
and turning the leg rests outwards. You can then
C
easily lift off the leg rests.
3. Press the seat into a U shape. Take hold of both
sides of the seat frame and fully collapse the
wheelchair. If you have a back rest bar, remove it
first by pressing in the catch on the inside of the
left bracket and then folding the bar down.
4. Remove the drive wheels by pressing the button
in the centre of the wheel while pulling the wheel
away from the wheelchair. Finally, fold the anti-tip
devices upwards.
Be careful not to trap your fingers between
the frame and the foot rest.
Be careful not to trap your fingers between
the frame and the leg rest.
4 NG
,