Invacare Rea Spirea4 NG User Manual page 27

1.
B
Tool: 5 mm Allen key
1.
B
A
Tool: 5 mm Allen key
2.
C
D
Tool: 5 mm Allen key
AMPUTEE LEG REST
1. Attach the leg rests by pushing the pin at the upper
A
2. Loosen the screw (A) on the cushion's mounting
HEAD REST
1. Use the hand knob (A) to adjust the height of and
2. Adjust the angle and depth with two screws (C)
part of the leg rests down into the tubes on the
wheelchair. You must angle the leg rests outwards
when you insert them. By twisting the leg rests
this way they will lock and there will be no risk of
them coming off the wheelchair.
to adjust the cushion's angle and depth. Loosen
the screws (B) to adjust the height.
When using the amputee leg rest, the balance
of the wheelchair changes. The risk is minimised
by moving the drive wheels backwards in the
drive wheel attachment and by using the passive
or double amputee drive wheel attachments.
See chapter on Drive wheel settings.
remove the head rest. The tube is equipped with
a "memory ring". Loosen the screw (B), adjust,
and tighten.
and the handle (D). Loosen and adjust.
27