Invacare Rea Spirea4 NG User Manual page 33

A
4NG
Rea Spirea
A. Front restraints with straps
1. Connect the front straps around the front part of
the chair's frame.
2. Release the wheelchair's brakes and tighten the
front straps by pulling the chair backwards.
3. Brake the chair.
B. Fastening at the back
1. Attach the snap hooks in the transport bracket by
the back rest attachment.
2. Tighten the straps.
C. Fastening the pelvic belt and safety belt
1. Check that the pelvic belt is securely fastened.
2. Fasten the car's safety belt over the user.
Note that the Rea Spirea4 NG should not be
used for seated transport in a vehicle if the
wheelchair is not equipped with transport
brackets (A) and does not have a neckrest
fitted
33