Invacare Rea Spirea4 NG User Manual page 12

ASSEMBLY
1.
2.
3.
4a.
12
1. Attach the drive wheels by pressing the button in
the centre of the wheel while you slide the axle
into the drive wheel plate.
At this stage it is important that you check that
the locking pin has actually locked the wheels
into position.
Take hold of the wheels and try to detach them.
This should NOT be possible.
2. Unfold the wheelchair by taking the seat's edges
and pressing these outwards/downwards.
Be careful not to trap your fingers between
the seat and frame tube.
If you have a back rest bar, fold it up into posi-
tion.
3. Lower the detachable arm rests in their brackets
on the frame.
Do not put your fingers on the seat frame.
4a. Foot rests
Attach the foot rests by pushing the pin at
the upper part of the foot rest down into the
wheelchair's frame tube. The foot rests must be
angled outwards when they are inserted.
Lock the foot rests by turning them inwards. The
foot rests are automatically locked so that there
is no risk of them coming off the wheelchair.
Be careful not to trap your fingers between
the frame and foot rest.