Invacare Rea Spirea4 NG User Manual page 15

1.
Tool: 5 mm Allen key
D
2.
Tool: 5 mm Allen key
3.
A
Tool: 5 mm Allen key
FOOT PLATES/CALF PADS
A
C
B
1. Angle-adjustable foot rests
Adjust the angle and depth of the foot rest by
loosening the screw (A) with a 5 mm Allen key.
You can then easily adjust the foot plate to the
correct position.
Do not place anything on the foot plate when
the screw is loose.
2. Calf pads
The calf pads can be fitted in two different depth
positions. Swing the pad forwards. Loosen the
screw (B) with an Allen key. Move the large nut
(C) from the reverse side and place it in the other
attachment hole. Move the calf pad to the new
position and secure it in place with the screw.
The height of the calf pads can easily be adjusted
using the hand wheel (D).
3. Foot rest one-piece
Adjust the angle and depth by loosening the two
screws (A) by the foot rest fastener with a 5 mm
Allen key. Adjust the foot rest to the correct
position and tighten the screws.
Do not put anything on the foot rest when
the screws are loose.
The foot rest can be folded up. Lift the left side of
the foot rest upwards.
Be careful not to trap your fingers between
the foot rest and the support when you fold
it down.
15