Table of Contents
Advertisement
1-2.
B
A
Tool: _4 mm Allen key
10 mm socket spanner
1.
2.
A
26
Anti tip device
The anti-tip device is also used as a step tube. It is
easy to adjust the height.
1. Remove the plastic plugs from both the step tubes/
back frame parts. Push the anti-tip device into place
and screw tightly with the nut (A) and screw (B).
2. Pull the spring-loaded plastic washer back and slide
the anti-tip device to the desired position. Make
sure that the anti-tip device is secure in the new
position.
Always remember to fold down the anti-tip
devices again when you have had then folded
up.
PUSH HANDLES
Adjusting the push handles
1. If your wheelchair has push handles that can be
raised and lowered you can easily change the height
by loosening the knob, setting it to the desired
height and tightening the knob.
2. When the hole (A) is visible, at the top edge of
the attachment, the handle will be in the correct
"lock position".
Advertisement
Table of Contents
