Fanvil BW530 User Manual page 30

Server Name
Server Address
Server Port
Account Name
Password
Phone Number
Display Name
Proxy Server Address
Proxy Server Port
Proxy Username
Proxy Password
Domain Realm
Enable Register
Register Expire Time
NAT Keep Alive Interval
User Agent
Signal Key
Media Key
Local port
Ring type
Hot line Number
Conference Number
Transfer Expire Time
Enable subscribe
Enable Keep
Authentication
NAT Keep Alive
so, show Unapplied;
Set the server name.
Input your SIP server address.
Set your SIP server port.
Input your SIP register account name.
Input your SIP register password.
Input the phone number assigned by your VoIP service provider.
Phone will not register if there is no phone number configured.
Set the display name.
Set proxy server IP address（Usually, Register SIP Server
configuration is the same as Proxy SIP Server. But if your VoIP
service provider give different configurations between Register
SIP Server and Proxy SIP Server, you need make different
settings.）
Set your Proxy SIP server port.
Input your Proxy SIP server account.
Input your Proxy SIP server password.
Set the sip domain if needed, otherwise this VoIP phone will use
the Register server address as sip domain automatically. (Usually
it is same with registered server and proxy server IP address).
Start to register or not by selecting it or not.
Set expire time of SIP server register, default is 60 seconds. If the
register time of the server requested is longer or shorter than the
expire time set, the phone will change automatically the time into
the time recommended by the server, and register again.
Set examining interval of the server, default is 60 seconds
Set the user agent if have, the default is VoIP Phone 1.0
Set the key for signal encryption
Set the key for RTP encryption
Set sip port of each line
Set ring type of each line
Set hot line number of each line
Configure conference number in server conference.
For the phone supports the transfer of certain special features
server, set interval time between sending "bye" and hanging up
after the phone transfers a call.
Enable the option ,the phone will receive the notify from the
server.
Enable/Disable Keep Authentication System will take the last
authentication field which is passed the authentication by server
to the request packet. It will decrease the server's repeat
authorization work, if it is enable.
Enable/Disable keeps NAT of SIP alive.
If some server refuse to register with too short interval time, and
- 30 -