Fanvil BW530 User Manual page 21

Active IP
Current Netmask
MAC Address
Current Gateway
Get MAC Time
Please select the proper network mode according to the network condition. BW530 provide
three different network settings:
Static: If your ISP server provides you the static IP address, please select this mode, then
finish Static Mode setting. If you don't know about parameters of Static Mode setting,
please ask your ISP for them.
DHCP: In this mode, you will get the information from the DHCP server automatically;
need not to input this information artificially.
PPPoE: In this mode, your must input your ADSL account and password.
You can also refer to 3.2.1 Network setting to speed setting your network.
Obtain DNS server
automatically
If you use static mode, you need set it.
IP Address
Netmask
Gateway
DNS Domain
Primary DNS
Alter DNS
If you uses PPPoE mode， you need to make the above setting.
PPPoE Server
Username
The current IP address of the phone.
The current Netmask address.
The current MAC address of the phone.
The current Gateway IP address.
Shows the time of getting MAC address
Select it to use DHCP mode to get DNS address, if you don't select
it, you will use static DNS server. The default is selecting it.
Input the IP address distributed to you.
Input the Netmask distributed to you.
Input the Gateway address distributed to you.
Set DNS domain postfix. When the domain which you input can
not be parsed, phone will automatically add this domain to the end
of the domain which you input before and parse it again.
Input your primary DNS server address.
Input your standby DNS server address.
It will be provided by ISP.
Input your ADSL account.
- 21 -