Fanvil BW530 User Manual page 18

Please select the proper network mode according to the network condition. BW530 provide
three different network settings:
Static: If your ISP server provides you the static IP address, please select this mode, then
finish Static Mode setting. If you don't know about parameters of Static Mode setting,
please ask your ISP for them.
DHCP: In this mode, you will get the information from the DHCP server automatically;
need not to input this information artificially.
PPPoE: In this mode, your must input your ADSL account and password.
You can also refer to 3.2.1 Network setting to speed setting your network.
Choose Static IP MODE，click【NEXT】can config the network and SIP(default SIP1)simply,
also can browse too. Click【BACK】can return to the last page.
Static IP Address
Netmask
Gateway
DNS Domain
Primary DNS
Alter DNS
Display Name
Server Address
Server Port
User Name
Password
Phone Number
Enable Register
Input the IP address distributed to you.
Input the Netmask distributed to you.
Input the Gateway address distributed to you.
Set DNS domain postfix. When the domain which you input can
not be parsed, phone will automatically add this domain to the end
of the domain which you input before and parse it again.
Input your primary DNS server address.
Input your standby DNS server address.
Set the display name.
Input your SIP server address.
Set your SIP server port.
Input your SIP register account name.
Input your SIP register password.
Input the phone number assigned by your VOIP service provider.
Start to register or not by selecting it or not.
- 18 -