Fanvil BW210 User Manual

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

BW210 VoIP Phone

Corporate Headquarters

Fanvil Technology Co., Ltd

Address: Unit 4A, Building NO.7,

aTian An Industrial Park, Nanshan

sdistrict,Shenzhen P.R.China

Web Site: www. Fanvil.com

Tel: +86 755 26402199

Fax: +86 755 26505858

User Manual

Version: V1.7.18.17 Oct 23 2008

This document is supplied by Fanvil Technology Co., Ltd, No part of

this document may be reproduced, republished or retransmitted in

any form or by any means whatsoever, whether electronically or

mechanically, including, but not limited to, by way of photocopying,

recording, information recording or through retrieval systems,

without the express written permission of Fanvil Technology Co.,

Ltd. Fanvil Technology Co., Ltd reserves the right to revise this

document and make changes at any time and without the

obligation to notify any person and/or entity of such revisions

and/or changes. Product speciﬁcations contained in this document

are subject to change without notice.

Table of Contents

Need help?

Do you have a question about the BW210 and is the answer not in the manual?

Questions and answers

Summary of Contents for Fanvil BW210

Page 1 © 2005 Fanvil technology Co,. Ltd All rights reserved. This document is supplied by Fanvil Technology Co., Ltd, No part of this document may be reproduced, republished or retransmitted in any form or by any means whatsoever, whether electronically or...
Page 2: Safety Notices
Safety Notices Please read the following safety notices before installing or using this phone. They are crucial for the safe and reliable operation of the device. Please use the external power supply that is included in the package. Other power supplies may cause damage to the phone, affect the behavior or induce noise.
Page 3: Table Of Contents
Table of Content 1. Introducing BW210 VoIP Phone ..................5 1.1. Thank you for your purchasing BW210 ...................... 5 1.2. Delivery Content ............................5 1.3. Keypad ................................6 1.4. Port for connecting ............................7 2.Initial connecting and Setting ....................8 2.1.
Page 4 4.3.5.3. Config Setting ..............................41 4.3.5.4. Update ................................42 4.3.5.5. Account Config ............................... 43 4.3.5.6. Reboot ................................44 4.3.6. Security ................................... 44 4.3.6.1. MMI Filter ..............................44 4.3.6.2. Firewall ................................45 4.3.6.3. NAT Config ..............................46 4.3.6.4. VPN Config ..............................48 4.3.7.
Page 5: Introducing Bw210 Voip Phone
1. Introducing BW210 VoIP Phone 1.1. Thank you for your purchasing BW210 Thank you for your purchasing BW210, BW210 is a full-feature telephone that provides voice communication over the same data network that your computer uses. This phone functions not only much like a traditional phone, allowing to place and receive calls, and enjoy other features that traditional phone has, but also it own many data services features which you could not expect from a traditional telephone.
Page 6: Keypad
1.3. Keypad The numeric keypad with the keys 0 to 9, *, and # is used to enter Digits and letters, additionally, the following keys are available: Key mapping: Key name Function Description Menu In idle state，press the MENU key to call up the menu. Phone Book In idle mode, press the Phone Book key to check the record list and add new records and revise the record.
Page 7: Port For Connecting
In menu, use this key to modify current setting or delete invalid information. And when you input number do Delete call out, you can use it to delete characters Temporarily hold the active call during the talking; press Hold the key again to unhold the call. You also can press this key then input the third party’s phone number and end with the # key during calling, you can make a call with the third party and hold the previous calling.
Page 8: Initial Connecting And Setting
2.Initial connecting and Setting 2.1. connect the phone Step 1: Connect the IP Phone to the corporate IP telephony network. Before you connect the phone to the network, please check if your network can work normally. You can do this in one of two ways, depending on how your workspace is set up. Direct network connection—by this method, you need at least one available Ethernet port in your workspace.
Page 9: Initial Setting
If your VoIP phone registers into corporate IP telephony Server, your phone is ready to use. 2.2. Initial Setting This VoIP Phone provides you with rich function and parameters setting. If you have enough knowledge about network and SIP protocol, it is better for you to understand many parameters. But if you know little about network and SIP protocol, you can also easily make initial setting according to the following steps to enjoy rapidly high quality voice and low cost from this VoIP Phone.
Page 10: Static Ip Mode
10. Press the key twice, then press numeric key “3”and hold until the screen display “ARE YOU SURE”. Press the key, the screen will display “CHANGING”, which means that the phone is trying to switch to PPPoE mode. If the icom “PPPoE” on the top of the screen keeps blink, it shows that the phone is trying to access the PPPoE server., and the IP is still static IP if you press key to display the current IP;...
Page 11: Dhcp Mode
gateway address. 9. Press the key to return to the previous menu, and then press the key, the LCD screen will display “NETMASK”. Press the key again and then the key, input your netmask and press the key to confirm it. The LCD screen will display the inputted netmask. 10.
Page 12: Basic Functions
3. Basic Functions 3.1. Basic operation 3.1.1. Accepting a call There are four methods to accept an incoming call: Pick up handset to accept incoming calls. Press the button If you need switch from a hands-free call to handset, please pick up the handset directly. If you need switch from a handset call to hands-free, please press the button, and then hang up the handset.
Page 13: Ending A Call
Please pick up or press the key. After you hear dialing tone, please press the key to dial the last phone number. Note: after you reboot the phone, the phone will delete callers and Redial will be invalid. 3.1.3. Ending a call Hangs up by handset onhook Hangs up by press when in hands-free...
Page 14: Callers
key to hold the first call, and then you can talk with the third party. By using hold function, you can talk with only one party; the other party who is on hold can’t talk with you. If you press # key, phone will hang up the first call, and then accept the new incoming call.
Page 15: Call Pickup
When you make secondary dial in off-hook/handsfree/standby pre-input mode, press key to postpone input, and screen display will show--. One --stands for 2 seconds. For example, you input 123--45, the phone will send DTMF(45) 2 seconds after the phone call 123. 123------45 will make phone send DTMF(45) at 6 seconds interval.
Page 16: Setting
When user A browses in an appointed Web page, user A can click to call user B via a link (this link to user B), then user A’s phone will ring, after A hooks off, the phone will dial to B. 4.
Page 17: Configuration Via Web
Input username and password, click “logon”, and you will enter setting web interface. There is a selection menu on the left side of the web interface. Click on the desired submenu; the current settings of this submenu will be displayed in the larger field on the right. You can now modify and store the values by using mouse and keyboard of your PC.
Page 18 Wizard Field Name Explanation Please select the proper network mode according to the network condition. FV6030 provide three different network settings: Static: If your ISP server provides you the static IP address, please select this mode, then finish Static Mode setting. If you don’t know about parameters of Static Mode setting, please ask your ISP for them.
Page 19: Call Log
Display detailed information that you manual config. Choose DHCP MODE，click【NEXT】to config simple SIP(default SIP1). You can browse it too. Click【BACK】to return to the last page. Like Static IP MODE。 Choose PPPoE MODE，click【NEXT】to config the PPPoE account/password and SIP(default SIP1). You can browse it too. Click【BACK】to return to the last page. Like Static IP MODE。 PPPoE Server It will be provided by ISP.
Page 20: Network
MMI SET Field name explanation Language Set Set the language of phone, English is default. 4.3.2. Network 4.3.2.1. WAN Config WAN Config Field Name explanation Active IP The current IP address of the phone. Current Netmask The current Netmask address. MAC Address The current MAC address of the phone.
Page 21: Lan Config
Current Gateway The current Gateway IP address. Get MAC Time Shows the time of getting MAC address Please select the proper network mode according to the network condition. FV6030 provide three different network settings: Static: If your ISP server provides you the static IP address, please select this mode, then finish Static Mode setting.
Page 22: Qos Config
LAN Config Field name explanation LAN IP Specify LAN static IP. Netmask Specify LAN Netmask. Select the DHCP server of LAN port or not. After user modify the DHCP Service LAN IP address, phone will amend and adjust the DHCP Lease Table and save the result amended automatically according to the IP address and Netmask.
Page 23: Qos Configuration
In chart 1, there is a layer 2 switch without setting VLAN. Any broadcast frame will be transmitted to the other ports except the send port. For example, a broadcast information is sent out from port 1 then transmitted to port 2,3and 4. In chart 2, red and blue indicate two different VLANs in the switch, and port 1 and port 2 belong to red VLAN, port 3 and port 4 belong to blue VLAN.
Page 24: Service Port
data VLAN ID; data untaged means after using VLAN, only VoIP packets will add voice VLAN ID. Other data packets will not use VLAN. DiffServ Enable Select it or not to Enable or disable DiffServ. DiffServ Value Set DiffServ value, the common value is 0x00. Voice 802.1P Priority Specify 802.1P Priority of voice/signal data package.
Page 25: Dhcp Server
Example: The IP address is 192.168.1.70. the telnet port value is 8023, the accessing address is telnet 192.168.1.70 8023 RTP Initial Port Set the RTP Initial Port. It is dynamic allocation. RTP Port Quantity Set the maximum quantity of RTP Port, the default is 200. Notice: 1）You need save the configuration and reboot the phone after set this page.
Page 26: Sntp
Gateway Set the Gateway of the lease table Lease Time Set the Lease Time of the lease table Set the default DNS server IP of the lease table; Click the Add button to submit and add this lease table Select name of lease table, click the Delete button will delete the selected lease table from DHCP lease table.
Page 27: Voip
Time Zone Select the Time zone according to your location. Time Out Set the time out, the default is 60 seconds. 12 Hours Systems Swich the time mechanism between 12 hours and 24 hours. Default is 24 hours mode SNTP Select the SNTP, and click Apply to make the SNTP Times effective.
Page 28 SIP Config Field name explanation You can switch by 【Load】 Choose line to set info about SIP, there are 2 lines to choose. button. Register Status Shows if the phone has been registered the SIP server or not; or so, show Unapplied; Server Name Set the server name.
Page 29 Password Input your SIP register password. Phone Number Input the phone number assigned by your VoIP service provider. Phone will not register if there is no phone number configured. Display Name Set the display name. Set proxy server IP address（Usually, Register SIP Server configuration is the same as Proxy SIP Server.
Page 30: Iax2 Config
Forward Phone Number Appoint your forward phone number. Server Type Select the special type of server which is encrypted, or has some unique requirements or call flows. Select DTMF sending mode, there are three modes: DTMF_RELAY DTMF Mode DTMF_RFC2833 DTMF_SIP_INFO Different VoIP Service providers may provide different modes.
Page 31: Stun Config
IAX2 Config Field name explanation Register Status Shows if the phone has been registered the IAX2 server or not. IAX2 Server Addr Input your IAX2 server address. IAX2 Server Port Set your IAX2 server port, the default is 4569. Account Name Input your IAX2 register account name.
Page 32 and port of SIP. The phone might register itself to SIP server with global IP and port to realize the device both calling and being called in private network. STUN Field name explanation STUN NAT Transverse Shows STUN NAT Transverse estimation, true means STUN can penetrate NAT, while False means not.
Page 33: Dial Peer Setting
Notice: SIP STUN is used to realize SIP penetration to NAT. If your phone configures STUN Server IP and Port (default is 3478), and enable SIP Stun, you can use the ordinary SIP Server to realize penetration to NAT. 4.3.3.4. DIAL PEER setting This functionality offers you more flexible dial rule, you can refer to the following content to know how to use this dial rule.
Page 34: Dial Peer
DIAL PEER Field name explanation There are two types of matching conditions: one is full matching, the other is prefix matching. In the Full matching, you need input your desired phone number in this blank, and then you need dial the Phone number phone number to realize calling to what the phone number is mapped.
Page 35 delete length is 3, the phone will delete the first 3 digits then send out the rest digits. You can refer to examples of different alias application to know how to set delete length. Introduction of how to set up dial-peer to implement switch between multi- SIP lines 9T mapping: If you have registered a SIP1 server and set dial-peer according to the above table，all calls will be sent via SIP1 server when you press the numeric key “9”...
Page 36: Phone
You need set Phone Number, Alias and Delete Length. Phone When dial number is XXXT and Alias is “0106228”, the SIP1 Rep:xxx server will receive If your dialed phone number “86106228” starts with your set phone number, the first digits same as your set phone number will be replaced by the alias number specified...
Page 37: Call Service
Input Volume Specify Input (MIC) Volume grade.； Handfree Volume Specify Handfree Volume grade G729 Payload Length Set G729 Payload Length Handdown Time Specify the least reflection time of Handdown, the default is 200ms. Output Volume Specify Output (receiver) Volume grade. Ring Volume Specify Ring Volume grade G722 Timestamps...
Page 38: Digital Map Configuration
Accept Any Call If select it, the phone will accept the call even if the called number is not belong to the phone. Auto Answer If select it, the phone will auto answer when there is an incoming call. Ban Outgoing If you select Ban Outgoing to enable it, and you can not dial out any number.
Page 39: Phone Book
Digital Map Configuration Field name explanation End with "#" Set Enable/Disable the phone ended with “#” dial. Fixed Length Specify the Fixed Length of phone ending with. Set the timeout of the last dial digit. The call will be sent after Time out timeout.
Page 40: Maintenance
Phone Book Field name explanation Shows the detail of current phonebook. Shows the name corresponding to the phone number Name Number Shows the phone number Ring Type Shows the ring type of the incoming call. Click “Modify” to change the selected information and click the “Delete” to delete the selected record.
Page 41: Syslog Config
Username Set FTP server Username. System will use anonymous if username keep blank. Password Set FTP server Password. Config File Name Set configuration file’s name which need to update. System will use MAC as config file name if config file name keep blank. For example, 000102030405.。...
Page 42: Update
Config Setting Field name explanation you can save all changes of configurations. Click the Save button, Save Config all changes of configuration will be saved, and be effective immediately. . Backup Config Right clicks on “Right click here…” and select “Save Target As….” then you will save the config file in .txt format user can restore factory default configuration and reboot the phone.
Page 43: Account Config
Password Set the FTP server password for download/upload. File name Set the name of update file or config file. The default name is the MAC of the phone, such as 000102030405. Notice: You can modify the exported config file. And you can also download config file which includes several modules that need to be imported.
Page 44: Reboot
Confirm Confirm the password. Select the account and click the Modify to modify the selected account, and click the Delete to delete the selected account. General user only can add the user whose level is General. 4.3.5.6. Reboot If you modified some configurations which need the phone’s reboot to be effective, you need click the Reboot, then the phone will reboot immediately.
Page 45: Firewall
Notice: Do not set your visiting IP outside the MMI filter range, otherwise, you can not logon through the web. 4.3.6.2. Firewall Firewall Configuration In this web interface, you can set up firewall to prevent unauthorized Internet users from accessing private networks connected to the Internet (input rule), or prevent unauthorized private network devices from accessing the Internet (output rule).
Page 46: Nat Config
Port Range Set the filter Port range Src Addr Set source address. It can be single IP address, network address, complete address 0.0.0.0, or network address similar to *.*.*.0 Set the destination address. It can be IP address, network address, Des Addr complete address 0.0.0.0, or network address similar to *.*.*.* Set the source address’...
Page 47 providing service to distrust customer, and is the best position to put public information The following chart describes the network access control of DMZ NAT Configuration Field name explanation IPSec ALG It is an encryption technology. Select it to enable IPSec ALG, the default is enable FTP is a service of connection layer which can transform intranet IP FTP ALG...
Page 48: Vpn Config
PPTP ALG Select it enable PPTP ALG, the default is enable Shows the NAT TCP mapping table Shows the NAT UDP mapping table Transfer Type Select the NAT mapping protocol style, TCP or UDP Inside IP Set the IP address of device which is connected to LAN interface to do NAT mapping.
Page 49: Vpn Configuration
VPN Configuration Field name explanation VPN IP Shows the current VPN IP address Select UDP Tunnel (VPN Tunnel) or VPN L2TP. You can choose only one for current state. After you select it, you’d better save configuration and reboot your phone. Enable VPN Select it or not to enable or disable VPN；...
Page 50: Logout
VPN Server Addr Set VPN Server IP Address VPN Server Port Set VPN Server Port VPN Server Addr Set VPN L2TP Server IP address VPN User Name Set User Name access to VPN L2TP Server VPN Password Set Password access to VPN L2TP Server 4.3.7.
Page 51: Appendix
--Config-- Network --Config-- --Config-- System 5. Appendix 5.1. Specification 5.1.1. Device specification Item this VoIP Phone Adapter(Input/Output) Input：100-240VAC 50～60Hz Output：5V/1A 10/100Base- T RJ-45 for LAN, Auto MDIX Port 10/100Base- T RJ-45 for PC, Auto MDIX Power Consumption Idle：1.5W/Active：1.8W LCD size 74 x 28mm Operation Temperature 0～40℃...
Page 52: Network Features
Echo cancellation： Support G.168 and hand-free can support 96ms Support VAD，CNG NAT transverse: support STUN Supports full duplex. SIP support SIP domain， SIP authentication （none， basic， MD5）， DNS name of server, peer to peer SIP support Pubic & Private server, user can through each server to calling in and out DTMF：SIP info，DTMF Relay，RFC2833 SIP application: contain SIP call forward/transfer/holding/waiting/3 way conference/Paging and intercom/ click to dial/pickup/ joincall/redial/unredial.
Page 53 3 D E F d e f 9 W X Y Z w x y z 4 G H I g h i 5 J K L j k l 6 M N O m n o...

Fanvil BW210 User Manual

1 Introducing BW210 Voip Phone

2 Initial Connecting and Setting

3 Basic Functions

4 Setting

5 Appendix

Quick Links

Need help?

Questions and answers

Related Manuals for Fanvil BW210

Summary of Contents for Fanvil BW210

Table of Contents