Installing Vpcc Tools - NEC US40a User Manual

130 Administrator Features

Installing VPCC Tools

US40a stores the installer for the following software. You can install them on Administrator menu.
CMO1.1
CMO2.0
DPM1.3
DPM2.0
Select [Start] → [All Programs] → [VPCC Tools] and select a desired installer. (For CMO and
DPM, up-version/down-version is not supported. If you have CMO or DPM of other version, select
[Control Panel] → [Add or Remove Programs] to uninstall the current software. Then, install the
appropriate one. Before starting uninstallation, disable the write filter according to "Write Filter
Setting and Releasing Procedures".
When the Installer starts, the following dialog is displayed. Some tasks take considerably long time,
however, proceed installation according to the instruction on dialog.
IMPORTANT: To install VPCC Tools while US40a is disconnected
from network, do not connect with network during installation.
Otherwise, installation may fail. Connect with network after installation
is completed.