Auto Connection To Virtual Pc; Program Initiated At Startup - NEC US40a User Manual

56 About US40a

Auto Connection to Virtual PC

Using the [Startup Setting] feature, you can automatically connect US40a to the virtual PC at logon
to US40a.The program initiated at startup can be specified in users.
1.
Click [Control Panel] out of the [Start] menu and select [Startup Setting].
2.
Select the program to be initiated automatically and click [OK].

Program Initiated at Startup

[no Setting]: Default setting. Provides no setting.
[RDP Client]: Activates the remote desktop connection.
[RDP Client for Dual Display]: Activates the remote desktop connection supporting dual
display.
[Default RDP Connection]: Connects to the default destination port automatically.
[Citrix Program Neighborhood]: Activates Program Neighborhood.
NOTES:
The startup settings given by the [Startup Setting] feature in
[Control Panel] is not registered in [Startup] appearing when you
select [All Programs] in the [Start] menu. To check the startup
settings, select [Startup Program Setting] and press [OK] in the
Control Panel or log off US40a and reboot it to confirm that the
program to be selected at the startup is actually initiated.
Administrator users can add or change the programs which can be
initiated at startup.
For Dual Display feature of US40a, see "Using Dual Display in
Connection of US40a to Virtual PC" described later.